## Configuring Bandwidth Policing Group

1. Create a new Multiplexing Service and configure the service settings.

2. Configure **Transport Stream** parameters.

   1. Open the **Mux** tab to configure total bitrate.

   2. Open and configure the **Output** tab:

      - Set an **Output Name**.
      - Set the output **Type**to IP.
      - Select the **network interface** and define the **stream address**.

   3. Open the **Bandwidth Policing** tab and configure the groups:

      - Click the **Add Group** button to configure a first group defined with a name and a bitrate.
      - Click the **Add Group** button to configure as many groups as needed defined with specific name and bitrate.

3. Assign the **Bandwidth Policing Group** to an output service to the transport stream.

   1. Click **add** to create a new output service.

      ![view output stream add service ts sp](/_machine-assets/948d0339574884306739c6ef4aac285985fe881bffa44b77f8c28765ce85c222.png)

   2. Set the **Service Passthrough**mode to **On** to display specific parameters.

   3. Select one of the **Bandwidth Policing Group** previously created.

   4. Configure the **Sources**' **Input** parameters with the appropriate **Network Interface**, **Destination IP Address** and **Port**number.

4. Assign the **Bandwidth Policing Group** to a video component of an output service.

   1. Click **add** to create a new component to an existing output service.

      ![view output stream add component to service](/_machine-assets/1c1153790de11f400a99196d0c1f9f766f8e578093dc9abcb7268641557884f6.png)

   2. Configure the **Input** tab parameters.

   3. Open and configure the **Output** tab and select one of the **Bandwidth Policing Group** previously created.

   4. Create and configure any other video component needed with specific **Bandwidth Policing Group**.

5. Click **Save and continue** to save your modifications.

6. Assign a server and start the service.

The service is running and **Bandwidth Policing Group** information (bpgId) are assigned to the service configuration files at both services and component level.

You can also monitor the [**Bandwidth Policing Group** statistics](/beam/multiplexer/monitor#bandwidth-policing) by clicking the `Pie chart` button on the Services page.