Unit Handling
Unit Installation
The RX1 is designed as rack mount equipment, i.e., it is designed to be mounted within a 19-inch rack. The RX1 should be mounted into that rack using rack rails available:
- MKP/UPH/RACKRAILS
If rack rails cannot be used, rack shelves will be required (one per RX1).
RX1s should not be stacked (either in racks or free standing), this may cause damage to the chassis.
Unit Transportation
The RX1 chassis is designed to be supported during transportation, as such, it is recommended that the RX1 is transported in its original packing.
If the original packaging is no longer available, it is recommended that the chassis has additional support within the flight case or other transportation packaging used. For example, a supporting metal shelf should be added along the underside of the chassis of the RX1 to support the main body when using a flight case.
Failure to improperly support an RX1 during transport may result in damage to the chassis and/or cards within the unit.